20/08/2014
Page 8 of 15
Fitting instructions# 3789248
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
19. Insert the chassis packers between the inner
Mount face and the outer chassis face
ensuring the packer slots over the mount
bolts. 1 per mount.
20. Ensure the mounts are as far forward as
possible and tighten the Mount bolts until the
packers are firm. Do not tighten to specified
torque at this stage.
BAR PREPARATION
21. If Installing a winch, fit the RFL bracket to the
bar using 4 M10 x 30 SEMS and flange
washers as shown.
22. Fit the Roller Fairlead to the Bracket using 2
M10 x 30 SEMS and flange nuts.
23. If Installing Warn 16.5TI , fasten the control
box to the RFL bracket using 2 M8x30 ss
bolts, spring washers and flat washers.
24. Load the winch onto the Bar and fasten from
underneath using the fasteners supplied with
the winch. Refer to winch manufactures
installation manual for wiring and fitment
connections.
For large frame Warn winches (including
16,500lb), tighten mounting bolts to 50-55 ft.
lbs (68-78 Nm).
For Warn Zeon winches, tighten mounting
bolts to 30-35 ft (41-47 Nm).
