ARANA FRESCO30, Installation And Operating Instructions Manual

Page: 46 / 76

EN
46
5.1 Choosing Installation location
This rooftop air conditioner is specifically designed for installation on the roof of a
vehicle with habitation compartments. The following points need to be considered to
determine the cooling requirements:
The size of the vehicle.
The size of the window (increases heat gain).
Amount of insulation in walls and roof.
Geographical location where the vehicle will be used.
Normal locations: the rooftop air conditioner is designed to fit over an existing roof
vent opening. When the vent is removed, it normally creates a 362*362mm (±2mm)
opening or a 400*400mm (±2mm) opening.
Other locations: When no roof vent is available or another location is desired, the
following is recommended:
5.0 Installation instructions
Read installation and operating instructions carefully before attempting to start
your rooftop air conditioner installation.
The manufacturer will not be liable for any damages or injury incurred due to
non-compliance of the instructions.
Installation must comply with the national and local codes and/or regulations.
Install the air conditioner, please pay attention on the structure of the vehicle and
the sealing of the openings.
Before climbing to the roof, please contact with manufacturer to confirm the
bearing and loading capacity.
DO NOT add any devices or accessories to the rooftop air conditioner except
those specifically authorized in writing by
ARANA .
This equipment must be serviced by qualified personnel and some states require
these people to be licensed.
ATTENTION!