17
8.6
SD memory card
The SD memory card is used to exchange data with the BRAVO 300S computer.
Before using it make sure the card is not protected (Fig. 27).
ONLY use the SD card supplied with the package.
Fig. 27
Fig. 28
Before inserting or removing the SD memory card ALWAYS switch off the computer.
Fig. 29
• Insertion:
Insert the memory card making sure to orient it correctly:
the card cut edge
A
must be face downward; push the card until it engages into
place and close the slot with the cover.
• Removal:
Press and immediately release the card into the slot and slide it out.
The SD memory card shall be inserted with computer off and must be left there during computer operation.
If the SD memory card is not inserted in the computer, or if it is inserted after computer switching on, this will cause an error
(Par. 14.1 Operation errors). Store the SD memory card into the suitable case (supplied) when not in use.
INSTALLATION
