ARAG Bravo 180S Series, Installation, Use And Maintenance Handbook

Page: 27 / 42

27
Par.10.2
Shifting
of the cursor Quits the menu or
the data change Confirms access to menu
or data change Menu item scrolling or
Data increase/decrease
12.2 Nozzle data
*
This menu allows setting and viewing the values of the nozzles being used.
Nozzles type
USR
  
Fig. 62
- First select
Nozzles type
(
ISO
or
USR
, Fig. 62).
- Then the computer automatically passes to the selection of the nozzle to be set (Fig. 63).
ISO nozzles CAN NOT BE MODIFIED.
Nozzle type
TypeA
  
Fig. 63
- Press
OK
to automatically pass to the setting of the flowrate for the selected nozzle (Fig. 64).
- Press
OK
to automatically pass to the setting screen of the reference pressure (Fig. 65).
Flow
0.250 GPM

Fig. 64
Pressure
40 psi

Fig. 65
- Repeat the setup for each available "user" nozzle.
The data of the nozzle being used allow Bravo 180S to calculate the
pressure without a pressure sensor.
NOZZLES
Nozzle type
ISO
Unit of measurement
US - US TURF Nozzle type
USR
(USER)
Unit of measurement
US - US TURF
Flowrate
(GPM)
Pressure
(PSI)
Flowrate
(GPM)
Pressure
(PSI)
ISO Orange 0.100 40 Type A 0.264 40
ISO Green 0.150 40 Type B 0.528 40
ISO Yellow 0.200 40 Type C 0.793 40
ISO Lilac 0.250 40 Type D 1.057 40
ISO Bluee 0.300 40 Type E 1.321 40
ISO Red 0.400 40
ISO Brown 0.500 40
ISO Gray 0.600 40
ISO White 0.800 40
ISO Light blue 1.000 40
ISO Light green 1.500 40
ISO Black 2.000 40

Flow calculation
>
Pressure sensor
par. 11.13
Press. calc.

par. 11.14
* MENU VISIBLE ONLY WITH SPECIFIC SETTINGS:
TO VIEW IT, ENABLE ONE OF THE INDICATED OPTIONS
USER SETTING