background image

 15

•  Never use a narrow high pressure stream of water or the turbo lance on soft surfaces susceptible 

to damage.

•  Use the high/low nozzle lance when cleaning windows. Be sure to adjust the nozzle to low spray 

and place the nozzle approximately four to five feet away from the window with the nozzle at 

forty five degree angle.  Squeeze the trigger and vary the spray pattern and angle until optimum 

cleaning efficiency is achieved 

(Fig. 23)

Detergent Injector/Storage 

•  Use detergents designed for power washers.  We offer four (4) power washer detergents, 

Auto, Motorcycle, Boat and Universal.  These can be purchased online at our website www.
arblueclean.com
.  Hardware stores or home centers also have power washer detergents for 
different cleaning projects.  The cleaning solution should be the consistency of water in order to 
prevent clogging your detergent tank and nozzle.

•  This system applies detergent under low pressure.  The cleaning power of the detergents 

is enhanced when applied with low pressure; and time is allowed to break down the dirt 
and grime.  The combination of low pressure and chemical action is very effective and can 
be better than scrubbing if applied properly. Always spray detergent on a dry surface, do 

not pre-soak area.  Wetting the surface first dilutes the detergent and reduces its cleaning 

ability.  Do not allow detergent to dry on surface. On vertical surfaces being cleaned, apply 
detergent to lower surfaces and work your way up to prevent detergent from causing 
streaks in the dirt and grime.  Rinse detergent by pressure washing from bottom up for 
same reason.

•  If a stain is particularly tough, it may be necessary to reapply the detergent and use a bristled 

brush to scrub the stain.  Subsequent power washing after brushing should successfully complete 
your cleaning job.

Twist to Adjust Pressure

Twist to Adjust Spray

Pressure

Spray

Fig. 23

Summary of Contents for AR383S





















Reviews: