13
o
Perating
i
nStrUctionS
*!Turn on the water supply at the faucet.!* (Fig. 17)
Powering Up
• Make sure the “ON/OFF” switch is in the “OFF” position. The power switch has international
symbols for ‘on’ and ‘off’: On (|) Off (O), (Fig. 18).
• Unwind the power cord completely and plug the GFCI into a grounded 120 volt outlet. Press the
‘reset
’ button on the GFCI box
(Fig. 19). The indicator window should show a red color. This must
be done each time the unit is plugged in.
• Release the safety lock button on the spray gun by pressing the safety lock button from right to
left (Fig. 20). While pointing the spray gun in a safe direction, squeeze the trigger on the spray
gun until there is a steady stream of water, letting the water and air out of the hose.
• Turn the power switch to the ‘ON’ (|) position. The unit will turn on for 1 - 2 seconds and shut off,
this is a normal function of the (TSS) auto start feature. Squeeze the spray gun trigger to begin
pressure washing.
• Squeezing rapidly will cause the (TSS) feature to miss an on/off cycle that may prevent from
turning on while squeezing trigger after rapid squeezing. Use slow deliberate trigger pulls to
avoid such symptoms.
Fig. 17
Fig. 18
OFF/0
ON/I
OFF/0
ON/I
Fig. 20
2
1
Trigger
Press to
Unlock
2
1
Trigger
Press to
Lock
Fig.19
