LEAK DETECTION SOLUTIONS
15
Unit 30, Lawson Hunt Industrial Park,
Broadbridge Heath, Horsham, West Sussex,
RH12 3JR
+44 (0) 1403 216100
www.aquilar.co.uk
L5. PULSE RATE
Menu>>Setup>>Password>>Pulse Rate
Figure 23 - Meters Pulse Rate Setup
Pulse rates for the water meters connected to the
system are selected here. Options available are
pulse every: 1, 10, 100 litres. It is important that the
pulse selected should match the output from the
meter fitted. If not the system will not be able to
accurately measure water volume.
Please contact Aquilar if you require a suitable pulse
meter.
Note:
If this screen is blank it is because no meters
have been enabled.
Fig 23.a shows a typical pulse
transmitter, this is where a pulse is
taken to be connected to the AT-WFM
control panel.
Figure 23.a - Typical Cyble