1100-2184 Rev 0
31
4.3 Fault Detection
The AT-G-ALERT-C controller will provide instantaneous details for any AT-G-ALERT in
the network experiencing a hardware fault condition.
To respond to a Fault event:
1. Tap
Mute
to silence the alert. This will mute the buzzer at the controller for 30-
minutes.
2. Tap
Details
to open the
Devices in Fault
screen to view the device(s) impacted.
The
Devices in Fault
screen will list the Floor/Room location, status, and
network details for each AT-G-ALERT found to be in fault.
4.4 Communication (Comm.) Error
After several unsuccessful attempts to communicate with a commissioned AT-G-ALERT
device, the AT-G-ALERT-C will change the device status to Comm. Error and this
condition will be indicated with an alert.
Figure 34 - Fault Detected screen
Figure 35 - Devices in Fault screen
Summary of Contents for AquiTron AT-G-ALERT-C
Page 1: ...1100 2184 Rev 0 1...
