1100-2184 Rev 0
26
6. Back at the AT-G-ALERT-C touchscreen, after the device has been put into the
“Commissioning Mode”, tap
Commission Device
. When the device has successfully
commissioned, a “Success” message will appear. If the commission was
unsuccessful, an “Unable to Contact Device” message should appear and the network
wiring should be checked.
7. After the commission is successful, tap the “Back” button to go back to the devices
screen.
Figure 26 - Device Pairing
Figure 27 - Once commission is
successful, tap Back
Summary of Contents for AquiTron AT-G-ALERT-C
Page 1: ...1100 2184 Rev 0 1...
