13 – Production of Hydrogen Rich Water
During production the
AquaVolta
®
Hydrogen Booster
has
to be placed on a
solid, flat ground. If the surface is too
soft, the pressure valve on the bottom is not properly
closed and the device is not working with enough
pressure.
With the On/Off button you start hydrogen production,
something you can recognise with the fine, rising
bubbles.
By pressing the button once the LED shines blue and the
device produces for 5 minutes. By pressing twice the LED
shines green (a) and the device produces for 7 minutes.
With accumulating production time an always growing
pressure bubble will form on the surface. (c) If you filled
the container without any air bubbles, then it is
predominantly hydrogen gas, which because of its
pressure increases the solubility of the hydrogen in the
water.
The bigger the water container, the longer the
electrolysis time should be. The small pressure container
has a capacity of 0,2 Liter and produces in 5 minutes 0,8
ppm hydrogen content with reverse osmosis water (a).
With VOLVIC (b) it needs 7 minutes to reach that.
The pictured gas bubbles in a 1,25 l bottle of EVIAN
mineral water shows the pressure build up after 7 (c)
and 35 minutes (d). This produced a hydrogen content of
1,3 (c) and 5,9 ppm (d).
a
b
c
d
