Notes on Dosing Schedules
1. As a general rule, supplement dosing should be done in small amounts more often rather than larger
amounts infrequently.This maintains an overall more stable environement chemically in aquariums.
2. Some supplements will preload with time scheduling suited for that particular element.For instance, some
elements for planted aquariums are better suited to be dosed at night while others are better dosed in the
daylight phase to support photosynthesis.
3. If a single dose at a specified time is desired, set the start and end time at least 1 minute apart. For example,
to dose at 9:00 AM set Start Time to 9:00 AM and End Time to 9:01 AM.
The Dashboard
The dashoard provides a clear overview of any one doser’s overall settings. The supplement being dosed by the
doser is displayed in the heading. “Upcoming Activity” lists the basics of the schedule currently being run. Reservoir
levels are displayed and the amount of remaining days based on the current schedule being run is calculated and
displayed. Calibration Volume is displayed. Pump Speed is displayed. All programmed schedules are displayed
as “My Schedules”. Schedules can easily be added by touching the “+” icon and saving the newly programmed
schedule. Any schedule can be turned on or off, edited, or deleted in the dashboard. Any active Alerts are displayed
at the bottom of the dashboard.
In upper right corner a menu icon bring up a menu that allows for editing Device Settings, ID-ing the device,
performing a simple accruate instant dose, Resetting the Device and Deleting the Device. Device Settings allows
one to edit all of the settings entered when the device was originally setup. Additionally, there is an option to move
the device from one aquarium to another provided there is another aquarium set up with an established Aquarium
Volume (with the caveat that the tubing is run to the other aquarium as well). This is a unique feature that allows a
single sequence of Primary and Secondary Units to separately dose many different aquariums from within the same
app.
Resetting the WiFi Configuration on the Primary Doser
In the event of a WiFi change or failure, all sentia dosers will merely follow the last programing.
In order to reset the WiFi configuration,
1. Disconnect the power adapter.
Summary of Contents for sentia dose
Page 2: ......
