Do not calibrate with a liquid other than the supplement to be used to ensure proper calibration.
The tubing must first be completely filled from the reservior all the way the point of output using the desired
supplement before calibration.
1. Select “Start” under “Tap Start to fill the line” when asked “Is the line full?”. Tap “Start” as many times as is
needed to completely fill the line. To avoid unintentional dosing, it is recommended that the line empty into a
separate container, not the aquarium system, when filling the line.
2. Once the line is filled, take the included calibration tube (cap off) and hold it at the end of the line to capture
all of the supplement as it comes out of the line.
3. Tap the “Calibrate” button and the pump will run for a specific amount of time.
4. Once completed, enter the amount of the supplement in the calibration tube.
Schedule
For Seachem/aquavitro Supplements:
Touching on the menu bars on the right side of the space under “Total Daily Dose for Selected Days” brings up
options for Suggested Dose and Calculated Dose.
Suggested Dose follows the labeling directions for the given Aquarium Volume entered previously. This is a great
starting point for any dosing regimen as it is simply following the supplement directions. Adjustments can be made
as necessary as time goes on.
Calculated Dose allows the entry of Measured Level from testing and compares it to the Desired Level to provide
a dose that will bring the level in the aquarium up to the Desired Level. If the Measured Level is higher than the
Desired Level it will ask you to retest in 48 hours to allow levels to drop off in the aquarium.
To build a custom dosing schedule, enter the desired amount, in mL, in the box under “Total Daily Dose for Selected
Days”. Specify the number of doses per day desired in “Doses per Day”. The amount of “Unit Dose” will update
based on “Total Daily Dose” and “Doses per Day” - this is the amount that will be added for each dose individual
dose. If the supplement should be dosed in a specific time of day or night, enter the time frame for the dosing to
occur. If the supplement should be dosed in a specific day interval, enter the day interval desired for the dosing to
occur. If the supplement should be dosed in on specific days of the week, enter the days of the week desired for the
dosing to occur.
For non-Seachem/aquavitro Supplements:
To build a custom dosing schedule, enter the desired amount, in mL, in the box under “Total Daily Dose for Selected
Days”. Specify the number of doses per day desired in “Doses per Day”.
The amount of “Unit Dose” will update based on “Total Daily Dose” and “Doses per Day”; this is the amount that will
be added for each dose individual dose.
Summary of Contents for sentia dose
Page 2: ......
