background image

4

SAVE THESE INSTRUCTIONS

division™ skimmers are made in conformity with the national and international security laws

.

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

 

1)  Check that the current on the pump’s label matches the outlet current. The pump has a differential 

switch (protector) through which the nominal current must be lower or equal to 30 mA.

2) 

Never operate the pump without water to avoid damage to the pump motor.

3)  Before plugging in the pump, check that the cord and pump are not damaged.
4)  The pump has a type Z cable link. The cable and plug cannot be substituted or repaired. In case 

of damage, replace the entire pump

5)  CAUTION: disconnect all submerged electrical products before doing maintenance in the 

water; in case the plug or electrical outlet is damaged, switch off the circuit breaker before 

disconnecting the plug from the outlet.

6)  This appliance 

can be run in liquids or in any environment with a maximum temperature of 

35°C/95° F.

7) 

Do not use for purposes (

i.e. in bathroom or similar applications) 

other than for which it was 

designed.

8) 

Avoid use with corrosive or abrasive liquids.

9)  This appliance has not been designed for use by children or mentally challenged individuals. 

Appropriate adult supervision or persons responsible for personal safety is required.

10) 

Do not disconnect from an electrical outlet by pulling the cord.

11) 

The filter can only be used in the above-mentioned applications and is only for indoor use.

12)  This appliance has no user serviceable parts. 

 

INSTRUCTIONS FOR THE CORRECT DISPOSAL OF THE PRODUCT ACCORDING TO EU DIRECTIVE 
2002/96/EC

When used or broken, this product does not have to be disposed with other waste. It can be 
delivered to specific electrical waste collection centers or to dealers who provide this service. 

Disposal of electrical products separately avoids negative consequences for the environment 

and for overall public health and allows the reuse of materials providing savings of energy and 

resources.

LIMITED WARRANTY

Seachem guarantees this product (see Exclusions below) to the original purchaser against defects of 
materials and workmanship for a period of five (5) years from the date of original purchase, except for 
the pump’s impeller, which is guaranteed for a period of six (6) months.  This warranty is limited to repair 
or replacement (at Seachem’s option) of defective product only and does not cover loss of aquarium life, 

personal injury, property loss, or damage arising from the use of the product.  You must retain original 

Summary of Contents for division 125

















Reviews: