8 - 14
IsACQ450- Rev. 300507-
Via dell’Industria, 0 - 405 Cavriago (RE) Italy Tel.: +39 05 494403
Fax: +39 05 494410 http:\\www.aquatronica.com E-mail: [email protected]
Main Menu
By connecting one or more Dosing Pump Modules to
the power unit (Max 4), the Aquatronica controller au-
tomatically recognises the accessory without the user
having to do a thing (Fig.1).
For any pump settings, proceed as follows (Fig.2):
Main screen page
Main menu
Dosing Pumps
Select one of the dosing pumps shown (option
possible only if there are several modules con-
nected, see Fig.3).
Once you have defined the pump module you wish to
work with (Fig.3), click “Enter”; you access the rela-
tive menu (Fig.4) where the following operations are
allowed:
Name Change (Fig. 4)
This option allows to change the name of the dosing
pump module or the name of each single pump of the
module connected to the controller.
To change the name of the dosing pump module, pro-
ceed as follows:
•
Select the
“Name Change”
menu with the
keys
and press
“Enter”
.
•
Select the letter to insert with the
keys and use
the
keys to move around inside the word (ex. Fig.
5); press
“Enter”
at the end.
To change the name of a single dosing pump module,
proceed as follows:
•
Select the
“Pump Selection”
menu with the
keys and press
“Enter”
.
•
Select the letter to insert with the
keys and use
the
keys to move around inside the word (ex. Fig.
5); press
“Enter”
at the end.
Main Menu
Settings
Dosing pumps
Module 1
Module 1
(Fig. 4)
(Fig. 3)
(Fig. )
Power Unit
Function keys
Module
Module 4
Module 3
Name Change
Pump Selection
About
Agenda
New Dosing device connected
01
(Fig. 1)
Dosing pumps
Dosing pumps
(Fig. 5 )
Dosing_
ENGLISH
