![Aquatronica ACQ140 User Manual Download Page 7](http://html.mh-extra.com/html/aquatronica/acq140/acq140_user-manual_2961983007.webp)
7
•
SD CARD PLUG and UNPLUG
To insert the SD card, place your TOUCH CONTROLLER face down and insert the card as shown in the picture.
Remove the SD card using your fingers and pull.
•
BATTERY INSTALLATION
Remove device cover, pull out battery and replace it with a new one (3V button CR2032 type), then replace
cover.
•
BRACKET INSTALLATION
•
Install bracket only after all required cables have been plugged and the rear panel has been
properly closed.
•
At first, install rib into the slot on the bottom side, then use your fingers to push the slot-in pivot
into the back cover slot (see picture).