5
w w w . a q u a t i c l i f e . c o m
MEMBRANE REPLACEMENT
With proper use and flushing, the membrane should last 12
months or more. Membrane life depends on the water supply,
maintenance of the filter cartridges and how often the
membrane is flushed to prevent build up.
➊
To replace the membrane, loosen the membrane strap
bolt on the left side of the membrane housing. The strap
screw can be loosened by pressing down on the membrane
housing and reversing the screw to release tension on the
strap. As the tension decreases the membrane housing
will start to relax, making it easier to remove the screw.
The screw DOES NOT need to be completely removed.
➋
Remove the U-shaped connection between the filter
canisters and the membrane housing. Refer to the
membrane connection section referenced previously.
This will allow the membrane housing to be lifted up
to remove the membrane clamps located at the ends
of the membrane housing.
➌
Completely remove the bolts, nuts and washers located
on the front and back sides of the membrane clamps.
The top section of the clamp will lift off easily; the bottom
clamp will require the membrane housing to be lifted up
slightly so that the bottom clamp can be removed.
➍
With both clamps removed, the black membrane plug can
be removed. The plug has two O-rings and it will take some
force to remove the plug. Take care to not damage the plug
and the O-rings located on the inside.
RO Daddy
™
Instruction Guide
