11
The light fixture can be hung from overhead supports with optional suspension hardware. The fixture
is equipped with Mounting points on the housing for easy connection. refer to the installation
guide included with the suspension hardware.
The aquatic life Marine light fixture is equipped with a built in digital Timer and a single power
cord. The Timer enables independent control of three lighting zones in the fixture. connect the
power cord into a grounded outlet (gfci). The display will illuminate when power is supplied.
The digital Timer controls three zones in the Marine light fixture: 10,000 K lamps, 420/460
lamps and lunar led’s. each of these zones can be programmed to operate at different times
throughout the day. see page 21 for timer setup and operation.
4) place the fixture over a covered aquarium and adjust (slide) the aquarium frame Mounts so that
the base of each Mount is firmly resting on the aquarium frame.
3) reattach both end plates.
aqUariUM FraMe MoUnts
sUsPension systeM
(OPTiOnAL ACCEssORy, iTEM # 420063)
PoWer
tiMer
NOTE:
each zone has
been pre-installed with
a different lamp that
will provide an array of
spectral output for the
tank inhabitants.
Page
8
Page
7
Page
9
Page 8
Page 7
Page 9
