17
The lamps are packaged in a protective tube to help eliminate damage during shipping.
1) remove the lamps from their protective tubes.
2) T5 ho lamps use a mini bi-pin connection to make contact with the fixture's sockets. To install,
insert both ends of the lamp into sockets and rotate 90 degrees. The min bi pin connections
should now be horizontal in the socket.
3) install lamps in the following sequence:
• 1st 10,000 K Lamp, in sockets closest to front of fixture
• 2nd 420/460 Lamp, in second sockets from front of fixture
• 3rd 10,000 K Lamp, in third sockets from front of fixture
• 4th 420/460 Lamp, in sockets closest to back of fixture
The Timer will control the lamps in the above arrangement. any change in the sequence of lamps
will change the Timer’s ability to control the lamps as designed.
LaMPs
PaCkaging
3) your new fixture includes a plastic film on the lens cover to protect it during shipping. peel the
protective film off both sides of the acrylic lens cover.
Page 8
Page 7
Page 9
NOTE:
do noT replace the
acrylic lens cover until the
aquarium frame Mounts
have been attached.
