Function : Form : Fashion
2
Attaching control fixing brackets
Prepare the wall to take the
control fixing brackets. The
installation of the control
fixing brackets will depend
on each individual situation
i.e. if there is access from
behind the shower.
Brackets attached from
‘behind’:
40mm diameter holes are
required.
Brackets attached from
‘front’:
68mm diameter holes are
required.
Conduits should be used in
the walls where necessary
to protect the cables and
allow maintenance.
Note:
If a double trim plate
is used the control fixing
brackets must be
positioned so that the
openings at the back are
horizontal as shown.
Attach the control fixing
brackets using the screws
supplied.
Brackets attached from ‘behind’
Function : Form : Fashion
1
Multiplex Duo
Shower ControlShower Control
INSTALLATION SEQUENCE
- Shower Control Option
To make the installation easier, we
recommend that the control fixing
brackets are cut down as shown using
a hacksaw.
Cut down control
fixing brackets
Brackets attached from ‘front’
3
Finish the wall by tiling etc.
40mm diameter holes
should be drilled in the tile
etc to finish.
Finish the wall
80
40
Required hole sizes
