Aquaticausa.com
Aquaticabath.ca
E: [email protected]
Multiplex Duo
Shower Control
INSTALLATION SEQUENCE
- Bath Control Option
4
5
Bath control option
6
7
Bath control option
Bath control option
Unscrew and remove the nut and washer from the
control brackets and data cables. Carefully pull the
‘front’ control wheel off the controls, taking care not
to mix them up.
If required the control bodies can be removed from the
control brackets by pulling off the front control wheel,
turning the control bodies anti-clockwise and liffting
out. To refit, position the control bodies in the slots and
turn clockwise.
12
13
14
15
Bath control option
‘O’ ring
Prepare the bath rim to take the control fixing
brackets. 35mm diameter holes are required to fit the
brackets. Feed the control data cables through the
holes, then insert the control brackets.
Feed the washer and nut onto the control data cables
and screw hand tight onto the control barcket bodies,
help may be required at this stage. Push fit the ‘front’
control wheels onto the controls.
-
