by
Downtown Spa
The spa works efficiently and safely if it is installed
correctly and in compliance with the regulations in
country of use.
This pre-installation guide provides information for a proper
preparation of the environments and the plumbing and
electrical connections. This allows for a quick and safe
installation.
The pre-installation stages involve the following professionals:
•
A construction engineer for the calculation of the loading
capacity of the platforms or floors.
•
A qualified and certified company that will prepare the
installation site according to the instructions provided in
this guide, following current work safety regulations.
•
Certified and qualified electrician and plumber who prepare
electrical and plumbing systems in compliance with local
and national regulations regarding civil and industrial
systems.
The user must promptly notify the professionals of any
existing underground obstacles like gas or water lines
and electrical or telephone cables.
Upon completion of pre-installation all these specialists must
issue a declaration of conformity of the systems installed.
Without such document, Aquatica declines any responsibility
for damage to the systems or premises where the spa will be
installed.
We recommend checking with the appropriate
municipal authorities to see if there are constraints that
prevent installation or if permits might be
required.
An incorrect pre-installation could cause structural
damage to the spa and void the warranty.
TEMPORARY POSITIONING
The installation of the hot tub should be done
immediately upon receipt.
In any case, once unpacked, if it is necessary to temporarily
place it on a surface awaiting the installation, it will be
necessary to place level concrete slabs having a minimum
thickness of 5 cm under the entire bottom of the spa.
Since
the temporary base may shift, it is recommended to
leave the hot tub in that position for the shortest pos-
sible time.
Do not leave the empty hot tub in DIRECT SUNLIGHT.
The surface temperature could rise above 80°C (176F)
resulting in serious damage, including the deformation of the
surface and components. Damage caused by direct
exposure to sunlight is not covered by the warranty. In such
conditions place a cover (fixed or mobile) to protect your spa
unit.
Please note
Aquatica cannot be held responsible and
does not
recognize the warranty
in the case of:
•
Installations or connections that are not
compliant
or that are carried out without following
the national regulations concerning civil and industrial
installations.
•
Pre-installation and installation carried out by
unqualified personnel
or otherwise not in compliance
with the instructions in the preinstallation and
installation manuals.
•
Incorrect preparation of the installation
environments
, including the supporting surface.
•
Accidents and damage due to a non-compliant
installation or use of the hot tub.
•
Masonry works
that prevent the removal and handling
of the hot tub or defective parts thereof.
80˚C
176˚F
3
