27 |
A GH 5 I N S T R UC T I O N M A N UA L
To install your Aqua View finder:
STEP 1:
Carefully verify that the O-ring and its groove are free from scratches or foreign
matter. Lubricate the O-ring with a light coat of silicone grease. Also check that
the O-ring mating surface on the housing is clean and free of any physical
damage.
WARNING:
For proper handling of O-rings, follow the detailed instructions outlined in the
O-
rings
section (page 28).
STEP 2:
Insert your Aqua View finder inside your housing. Be sure to align the Aqua View
finder with the aligning pin on the housing.
STEP 3:
Install your Aqua View finder retaining O-ring (#2).
WARNING:
It is highly recommended to perform a simple seal test without the camera after
performing the installation. View following section for details.
