12 |
A R 5 I N S T R UC T I O N M A N UA L
Camera Installation
NOTE:
If you are using an optical flash triggering, install your flash trigger on your
camera by following the procedure outlined in the
section (page 27).
STEP 3:
Make sure to align the camera stoppers (x2) with the LCD side of the camera
when installing (2).
NOTE: Camera is not shown in this view.
STEP 4:
If you have a lens with a gear installed on the camera pull the zoom-focus knob
and turn it to lock it in place as well as shown in the figure below.
