28 |
A R 5 I N S T R UC T I O N M A N UA L
Accessories
Flash triggering
There are three flash options compatible with the AR5 housing:
Optical triggering (#20091-OPT and #20091-OPT-VC)
Nikonos
-style bulkhead (#20091-NK and #20091-NK-VC)
Ikelite
-style bulkhead (#20091-KM and #20091-KM-VC)
NOTE:
Note that not all of the offered flash triggering options on the AR5 housing are
TTL compatible. An Ikelite DL5 external converter (#46074) is required for TTL
functionality. Purchased separately from Ikelite
For
Nikonos
and
Ikelite
style bulkheads, simply insert the velcroed board inside your
camera hot-shoe.
On top of your housing, you will find two Nikonos or Ikelite type
bulkhead connectors, the main and secondary connectors are wired through a switch
board that gives the user the option
of flash triggering.
Nikonos
(#20091-NK and #20091-NK-VC)
Ikelite
(#20091-KT and #20091-KT-VC)
Using the tip of a pen push the switches 1, 2, 3
& 4 to the ON (up) position, this will activate
the connections on your main 6 pins bulkhead
connector allowing eTTL communication
between the camera and the housed flash or
eTTL converter.
