If your SWA6+ was purchased from an Aquatic AV dealer and/or supplied with retail packaging it
is supplied with the Aquatic AV universal harness AQ-UNH-2 in order to connect the power and
speakers. Please proceed to section 1.4.1.
If your SWA6+ was supplied as a pre-installed waterproof entertainment system it will utilise 3rd
party wiring connections and is not supplied with the Aquatic AV 12-pin Harness. Please proceed
to section 1.5
1.4 12-pin Harness Connection (retail packaged models only)
1.4.1 12-pin Harness Wiring Diagram
1.3.1 Connections Diagram
All open wire connections should be soldered and protected against water and dust for best long-term performance.
*Retail packaged models only.
2. FM Radio Antenna Jack
1. 12-pin Watertight Harness*
3. RCA Auxiliary Outputs (Red & White)
4. RCA Auxiliary Inputs (Red & White)
5. 12V DC Triggers (Brown)
6. USB Input Connector
7. Wired Remote 8-pin DIN Connector
(Remote sold separately)
10. Power Attenuation Wires
(1x white, 1x black)
Power On LED (Green)
8. Bluetooth Halo Aerial
Technology Connector
No lower than a 2 Ohm load should be used
or damage may occur to the Digital Media
Locker.
Make sure the polarity of speakers are
connected correctly.
Power Antenna (7)
Fuse Box
No lower than a 4 Ohm speaker should be
used or damage may occur to the SWA6+.
Make sure the polarity of speakers are
connected correctly.
(White/strip)
Left Speaker 2
Right Speaker 1
Right Speaker 2
OPTIONAL
OPTIONAL
Left Speaker 1
Getting Started
Combined Stereo Subwoofer SWA6+
5
www.aquaticav.com
