1.3 Connections
1. 12-pin Watertight Harness*
The 12-pin harness supplies power and ground connections to the SWA6+ and four (4)
speaker channel output connections from the SWA6+ (see Connections Diagram 1.3.1).
Do not cut or modify the 12-pin harness* on the SWA6+ side or warranty will be void.
2. FM Radio Antenna Jack
Allows connection of FM radio antenna. For best FM performance make sure the antenna is
extended to the highest achievable position.
3
. Auxiliary Outputs
Allows external amplifiers to be connected to power additional speakers.
4. Auxiliary Inputs
Allows an additional RCA input from a standalone unit or another stereo source.
5. 12V DC External Triggers (x2)
Allows for external lighting or relays to be triggered (3A max load).
6. USB Input
For connection of USB thumb drives with MP3 and/or WMA files. Charges compatible USB
devices when connected via USB cable.
7. Wired Remote 8-pin DIN Cable
Allows connection of a Wired Remote Control (WR6 sold separately).
8. Bluetooth
Halo Aerial
Connector
Connect the Bluetooth
Halo Aerial Technology
Antenna (AQ-BTANT-1) to the male SMA
connector. Do not apply excessive torque on the SMA connector (no more than 0.5N-m). Use
hands to tighten the connection (do not use a wrench). See section 1.5.
9. Power Attenuation Wires
Allows the output level to be adjusted from a factory preset of -3dB to either -6dB, 0dB or
+6dB. See section 1.6 for further details.
Aquatic AV does not recommend the wired remote control WR6 for use in spa applications.
*Retail packaged models only.
Getting Started
Combined Stereo Subwoofer SWA6+
4
www.aquaticav.com
