background image

6 Aquatic

Serenity Owner's Manual & Installation Guide

PLEASE NOTE:

 The air bath action may cause even small amounts of bubble bath or shampoo to foam excessively.   

Exercise moderation in experimenting with different soap products.  

No servicing of this product should be done by the user.  There are no user serviceable parts.  All controls are located 

in the control recesses on the lip of the tub.  These are the only controls that should be used by the consumer.  Do not 

change or alter any of these controls under any circumstances.

Motors are self-lubricating -- No lubrication required.

SERENITY AIR BATHS USER INFORMATION

FCC CONSUMER INFORMATION

Electrical installation information listed on page 13.

This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in 

strict accordance with the manufacturers instruction, may cause interference to radio and television reception.  

It has been type tested and found to comply with the limits for a class B computing device in accordance 

with the specifications in subpart J of part 15 of the FCC rules, which are designed to provide reasonable 

protection against such interference in a residential installation.  However, there is no guarantee that inter-

ference will not occur in a particular installation.  If this equipment does cause interference, which can be 

determined by turning the equipment on and off, the user is encouraged to try to correct the interference by 

one or more of the following measures:

  

•  Reorient the receiving antenna.
•  Relocate the receiver with respect to the bath tub.  
•  Move the receiver away from the bath.
•  Plug the receiver into a different outlet so that the receiver and bath are on different branch circuits.
•  If necessary, the user should consult the dealer or an experienced radio/television technician for 

additional suggestions.

•  The user may find the following booklet prepared by the FCC helpful: “How To Identify and 

Resolve Radio-TV Interference Problems.” It is available from the U.S. Government Printing Office, 

Washington, DC  20402, Stock No., 004-000-00345-4.

Summary of Contents for Carrington 6638CF







































Reviews: