Aquatic Fitness System - Owner’s Manual
10
Adjusting Temperature
From the Temperature screen, push the up or
down arrow on the 5-Key Context Keypad to enter
the Setpoint screen. In this screen, use up and
down to select the desired temperature. Press
Accept to save the changes.
Summer Mode
During hot weather (AFS 19DT only), normal
filtering can cause swim spa to exceed the set
temperature, which stops the circulation pump so
the swim spa can cool. If the swim spa is not
filtering enough during hot weather, it is possible to
put it into Summer Mode to allow the pump to keep
running.
To enter Summer Mode, adjust the set point to the
lowest possible temperature, 59°F (15°C), and
continue to hold the down arrow on the 5-Key
Context Keypad. The temperature value will be
replaced by “Summer.”
Light Operation
Your swim spa is equipped with a Dynamic L.E.D. Light. The light has 2
modes: Color Change, which cycles through all colors, and Color Select, which
allows selection of any solid color from the Color Change mode. Push the light
button once to enter Color Change mode. To change between Color Change
and Color Select modes, turn the light off for 3 seconds, and then turn it back
on. Another way to change modes is to hold down the Light button until the
light flashes off and on. To synchronize all spa lights, turn off the light for 3-9
seconds and turn it back on.
Standby Mode
To enter Standby mode, hold down the center key
on the 5-Key Context Keypad while on the home
screen for 5 seconds. This mode disables all
automatic and manual functions so the pumps do
not accidentally start while you are cleaning the
filters. The swim spa stays in standby mode for 30
minutes. To reactivate the swim spa, press exit.
Summary of Contents for AquaFit 16
Page 1: ...i...
