manualshive.com logo in svg

Aquatic Access IGMT, Installation Manual, Page: 3 / 18

Share
Download
Aquatic Access IGMT Installation Manual Download Page 3

Contact:

Aquatic Access Inc.

1921 Production Drive

Louisville, KY USA 40299-2110

Toll Free 800.325.5438 Phone 502.425.5187

Fax 502.502.425.5817  [email protected] 

 

   

Table of Contents

                  

Installation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Placement of Socket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Socket Installation for Concrete Decks  . . . . . . . . . . . . . . . . . . . . . . . . . . .

Alternative Installations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Assembly of Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Water Connection  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Attach Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operation of Lift    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Service and Maintenance

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Routine Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Disassembly of Lift  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Determining the Cause of a Leak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Cleaning the Inside of the Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

To Reassemble the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Before Using the Lift Again  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Safety Procedures

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Addendum: Technical Specifications of Above-Ground Pool Lifts. . . . . 

  Visit us online at

 

AquaticAccess.com!

1
1
1
1

14

3
4
4
5

6
8
8

8
9

13

5
5

11

Summary of Contents for IGMT



















Reviews:

No comments