②
Filter (motor) can be washed by water.
In case the filter (motor) is clogged, take the filter (motor)
out for water washing.
After water washing, keep no-load operation for a few minutes
to make it dry. Then, the filter (motor) can be used again.
※
No.5-1 (below) shows how to take out/install the filter.
≪
Caution
≫
In case the dusts are collected, be sure to apply our standard
filter attached.
(When the liquid is collected, be sure to take the filter out first)
５．
Float Ball (to prevent overflow)
①
In case water or mud etc. remains in the tank, the float ball
will goes up, stopping sucking operation.
②
In case sucking operation is stopped, shut the switch off, and
then, throw them out.
S type Spring Stand
Filter
