２．
How to install filter (Motor)
Fix with six bolts and rubber packing into six holes located
at lower body.
３．
Maintenace
In case hose or outside of cleaner becomes dirty, wipe them with
towels, or the waste clothes, after a neutral detergent liquid is
soaked and firmly twisted.
※
For maintenance, be sure always to wear protective gloves.
6. Inspection
To use the product safely, be sure to check the below items, before the
operation. And, in case anything improper is found, immediately take
care/fix it immediately, before the operation.
Inspection Items
What to do
If the electric wire is damaged or deformed?
Replace the electric wire, and contact
service shop for the replacement.
If the plugs is deformed or not loosened?
Replace the electric wire, and contact
service shop for the replacement.
If the earth grip is not loosened, or working
normally?
Replace the electric wire, and contact
service shop for the replacement.
If the switch protective rubber is not torn ?
Replace the switch, and contact
service shop.
If the hose is deformed or not torn?
Replace the hose.
If the hose is not clogged with anything?
Remove the rubbish immediately.
If the filter is properly placed?
Place at proper position.
If the filter (motor) is not torn?
Replace the filter (motor)
If the filter (motor) is not clogged?
Clean the filter (motor) properly.
If the pail can is not deformed?
Replace the pail can immediately.
If the rubbish or liquid in the pail can remains?
Remove the rubbish or liquid out.
If the upper body is properly installed?
Install the upper body properly.
If each bolt or nut is properly fixed?
Fasten each part tightly.
If motor does not cause any abnormal noise?
Contact service shop.
