AquaStar StarzTruck, Installation Manual

Page: 14 / 22

12
PROBLEM: CLEANER CLIMBS TO THE SURFACE AND SUCKS AIR
CAUSES SOLUTIONS
Too much/improper water flow through cleaner Adjust water flow, Pg 4
Improper tension on rear flap Turn rear flap adjuster to I
If still climbing too much, reduce water flow
until the proper operation is achieved, Pg 4, 5
Steering failure 1. Check and clean rear screen
2. Check to see that cone gear is free and
rotates smoothly in both directions
3. Check medium turbine and spindle gear
assemblies for malfunction. This will require the
unit be disassembled, if you are not comfortable
with the cleaner’s assembly please seek
professional help.
PROBLEM: CLEANER HEAD FLOATS
CAUSES SOLUTIONS
Cleaner head or return line has air in it Remove all air from cleaner head
Stop all air from entering the pool through
the return lines
If cleaner head and hose are covered with fine
bubbles, give the hose a good tug. This will release
the air bubbles and allow the cleaner head to settle
to the bottom of the pool until the hose is covered
with bubbles again
STARZTRUCK AUTOMATIC POOL CLEANER TROUBLESHOOTING GUIDE