AquaStar StarzTruck, Installation Manual

Page: 4 / 22

2
STEP 1: CONNECTING AND SUBMERGING THE HOSES AND CLEANER
There are nine connector hoses and one leader hose with a gray hose cuff. The hose cuff con-
nects to the top of the StarzTruck automatic pool cleaner (see Fig. 1).
Connect the StarzTruck automatic pool cleaner hose sections by pushing and twisting the
tapered male connector end of each hose firmly into the open female end of the adjacent hose
section (see Fig. 2). Depending on the size and shape of your pool, all hose sections might
not be used. The hose should reach from the skimmer or safety vacuum lock wall fitting to the
furthest point in the pool plus one extra hose section. If the hose is not long enough, it will be
necessary to purchase additional hose sections from your pool dealer. After the correct hose
length has been assembled, fill the hose completely with water by lowering the attached Starz-
Truck automatic pool cleaner and then vertically pushing the hose down, allowing all the air to
escape. If optional leaf canister is purchased, install between first and second hose sections
(see Fig. 3).