STEP 12
ADD OPTIONAL LED LIGHTING
• Aquascape LED Garden and Pond Lighting (not included)
can be added to bring the water feature to life at night.
• The deck of the basin is covered with deck cylinders that
can be drilled to run low-voltage lighting cables beneath
the deck, keeping them out of view.
•
Determine the desired
location of each light and
identify which deck cylinders
will need to be drilled. Then,
using a spade bit or hole
saw, drill out a ¾" (19.05
mm) hole in each selected
cylinder (Figure 28). Do NOT
modify areas labeled “DO
NOT DRILL.”
• Run each lighting cable into
the top of the drilled cylinder
(Figure 29) and out through
the access panel. Be sure to
make all necessary connections outside of the basin.
Figure 28
Figure 29
STEP 11
CONT...
Note: It is recommended to install lights (not
included) at this time. Refer to Step 12 to complete
all lighting installation prior to covering the remainder
of the basin with gravel.
• Cover the remainder of the basin with a layer of gravel.
The pump access panel should be covered but accessible
for pump removal or maintenance.
15
☎
US (866) 877-6637 |
☎
CAN (866) 766-3426
86319 - 83013 Backyard Waterfall LFK [Instructions] 1-18.indd 15
1/23/2018 3:33:47 PM