background image

www.aquasafecanada.com   |   Maximus II Installation Instructions 05/13   |   page 27

page 26   |   Maximus II Installation Instructions 05/13   |   www.aquasafecanada.com 

Final Polishing Filter - How to change the Final Polishing Filter

This is the final filtration stage in your R.O. System.  The Final Polishing filter is rated for 1800-2000 
gallons of purified water production and therefore should be changed every second time you change 
your three pre-filters.

This concludes all filter change instructions for the Aquarium II Dual System.  Please check on your sys-
tem every hour after the filter change for the first three to four hours inspecting for any potential small 
leaks.  If any drips are detected please see our Leak Prevention Page (page 18) which will explain how 
to quickly and easily fix all potential leaks.

Please do not hesitate to contact if you should need further assistance.  
•  Phone: (Toll Free) 1-888-942-0226
•  Skype: Aquasafe
•  Email: [email protected]

Thank You for choosing Aquasafe Systems, we greatly value your business!

Figure 33

Replacing the 

Final Polishing 

Filter

www.aquasafecanada.com

3 Way T

www.aquasafecanada.com

Final Polishing Filter

to tank

to 

aquarium

sump 

tank

Remove (see Fig. 10) the three tubes 

from the fittings on either side of your 

used final polishing filter.

Attach the new final polishing filter by reversing steps 3 and 2. It does not 

matter which outlet of the male ‘T’ adaptor connects to the tank and which 

to the last D.I. Resin canister.The straight male adaptor connects to the 

faucet.

1

Depressurize your system (see Fig. 29)

Pull the  final 

polishing filter out 

of its clips.

3

Unscrew the straight male 

adaptor and the male ‘T’ 

adaptor from either end 

of the old filter and insert 

them into the new filter.

Pay attention to the 

direction of the arrow on 

the polishing filter and 

insert them on the same 

side they were on before. 

The male T adaptor goes 

on the side closest to the 

base of the arrow.

4

5

6

to faucet

Final Polishing Filter

Final Polishing Filter

Final Polishing Filter

New Filter

Old Filter

2

Turn on the Manual Shut-Off Valve and Tank Top Valve to repressurize your system. 

PLEASE NOTE: Please flush out the final polishing filter by allowing the tank to fill then empty the whole 

tank down the drain through the faucet. Do this flush twice.

AQUASAFE’S THREE YEAR WARRANTY

All Aquasafe Water Filtration Systems are hereby warranted to be free 
from defects in material and workmanship for a full 3 years from the 
time of the original purchase, excluding the filtration media (IE Re-
verse Osmosis Filters, Reverse Osmosis Membranes, DI Resin Beards 
and other such media) as it is typical to change such media approx 
every 6 months. Any filter housings or adaptor fittings found to be de-
fective will be replaced free of charge with all cost of shipping borne 
by Aquasafe. Any costs, labor and associated liability with removal or 
installation of the product for warranty consideration shall be borne 
by the purchaser. Please note that Aquasafe’s Systems are designed as 
DIY (Do It Yourself), therefore there should not be any costs associated 
with removal or installation of the very simple to install and maintain 
Reverse Osmosis Systems that Aquasafe offers.

FAUCET

Standard reverse osmosis faucets are replaced free for one full year.  
After which, the standard faucets can be replaced at any time for one-
half the current retail price at time of replacement for life.  Shipping 
costs for replacement Faucets shall be borne by the customer.

PRE AND POST FILTER CARTRIDGES

Once used in a system, the Reverse Osmosis Pre and Post Filter Car-
tridges are non refundable. However if the structural integrity of a Pre 
and Post filter is found to be damaged upon delivery and before use 
in a system, a full 100% replacement will be sent with the cost of ship-
ping being borne by Aquasafe. The structural problem must be made 
aware to Aquasafe no more then 30 days after delivery of product and 
all defective filters must be returned to Aquasafe.

REVERSE OSMOSIS MEMBRANES

All Reverse Osmosis Membranes offered by Aquasafe come with a 1 
year warranty. This warranty is void if any of the following has occurred 
or is not adhered to:
•  The Membrane has been subject to improper flow restriction ra-

tios. (please see the installation instructions pages for the proper 
setting of the flow restriction ratios)

•  If the water temperature exceeds 113°F (45°C).
•  The membrane is not subjected to a pH lower then 4 or higher then 

11.

•  The membrane is exposed to water pressure greater then 150 psi.
•  The membrane is allowed to dry out after its initial wetting. (The 

Membrane should always be kept moist after its initial exposure to 
water)

•  If the membrane is exposed to greater than 1500 PPM water

BOOSTER PUMPS

Reverse Osmosis Booster Pumps are warranted for 90 days after the 
date of purchase. If for any reason there is dissatisfaction with the pur-
chase of a booster pump within the 90 day period, a 100% refund of 
the purchase price will be issued. The cost of returning the product 
will be borne by the purchaser and the refund will be made when the 
product is returned to Aquasafe.

WARRANTY CONDITIONS

•Shipping costs to and from the company, of products to be consid-
ered for warranty, shall be borne by the purchaser unless otherwise 
specified in the warranty conditions listed above.
•  Any  costs  associated  with  removal  or  installation  of  the  product 

for warranty consideration shall be borne by the purchaser. Please 

note that Aquasafe’s Reverse Osmosis Systems are designed as DIY 
(Do It Yourself), therefore there should not be any costs associated 
with removal or installation of this very simple to install system.

•  This warranty does not apply to mechanical or structural damage 

caused by: excessive water pressures over 150 psi, improper han-
dling, installation or abuse.

•  Faucets  and  water  filtration  valves  are  warranted  for  a  period  of 

one year only unless otherwise specified. This warranty applies to 
manufacturing/material defects only.

•  All replaceable water filtration cartridges are warranted to be free 

from breakage/damage at the time delivery only.

•  This warranty does not apply to any part or component that has 

been subject to misuse, neglect or altered in any such way that it’s 
performance is affected.

•  The company “Aquasafe” accepts no liability for damage caused in 

any way by the product after installation. The product should be 
closely monitored after initial installation and installed in accor-
dance with plumbing codes in your area when and where appli-
cable.

•  Water filtration system installation instructions are provided online. 

These instructions are as a guide to the installer only and do not 
supersede the plumbing codes in your respective areas when and 
where applicable. Containment of these instructions does not con-
clude that the Company promotes or endorses self-installation, and 
no liability will be assumed by the company for the installation.

•  No person, representative or firm is authorized to commit Aqua-

safe Systems to any further liability or obligation than those stated 
on this form.

gENERAL CONDITIONS of WARRANTY

Damage to any part of a reverse osmosis system because of misuse; 
misapplication; negligence; alteration; accident; installation; or opera-
tion contrary to our instructions, incompatibility with accessories not 
provided by Aquasafe, or damage caused by freezing, flood, fire, or 
Act of God, is not covered by this warranty. In all such cases, regular 
charges will apply. This warranty is void if the claimer is not the original 
purchaser of the unit or if the unit is not operated under normal mu-
nicipal water or well water conditions.

We assume no warranty liability in connection with this reverse osmo-
sis system other than that specified herein. This warranty is in lieu of all 
other warranties, expressed or implied, including warranties of fitness 
for a particular purpose. We do not authorize any person or representa-
tive to assume for us any other obligations on the sale of this reverse 
osmosis system. Behind this product are years of research, design, and 
production skills. Our reverse osmosis drinking water systems have 
been carefully tested and approved. Through this warranty we are 
demonstrating our confidence in Aquasafe’s water filters and the qual-
ity our customers have come to expect from our 18+ years in business 
providing the finest quality drinking water at pennies per liter for the 
health and enjoyment of our long history of customers.

There has never been a greater need to be absolutely sure the water 
we are consuming and giving to our children is free of all contami-
nants, toxins and drugs.  The very best and most affordable way to en-
sure you and your loved ones are getting pure and healthy drinking 
water is with a water purification system from Aquasafe.

Make the choice to avoid all dangers of tap water and its health haz-
ards by getting your very own reverse osmosis system today !

WATER SYSTEMS & PARTS WARRANTY INFORMATION

Summary of Contents for Aquarium II Dual R.O./D.I. System
















Reviews: