12
CONTROLS
On-Off / Selecting a Programme
The machine is switched on by pressing the 'On/Off' button for 2 seconds. All the indicator lights will
light up for a few seconds and the 'Door Locked' indicator light will flash once.
Turn the programme selector dial to the desired programme. Load the laundry and detergent.
Select the options you require.
Press the 'Start/Cancel' button for 2 seconds to start the programme.
To Stop or Change a Programme
Press the 'Start/Cancel' button for 2 seconds.
Select 'Pump Out' on the programme selector dial.
When the machine has finished emptying, turn the programme selector dial to the new programme.
Press the 'Start/Cancel' button to start the programme.
If you cancel a hot wash programme, take care when removing the laundry, it might still be very hot.
Progress Indicator Lights
These will light up when you choose a programme, to indicate the progress of the selected
programme. When started, the first light in the cycle will stay lit and as the programme progresses,
successive lights will come on until the programme finishes.
Door Locked Indicator light
The 'Door Locked' indicator light will come on two seconds after you press the 'Start/Cancel' button
and will stay lit throughout the programme. A short time after the programme has finished the
indicator light will go out and you can then open the door.
Selected programmes will not start if the door is not closed properly, the 'Door Locked' indicator light
will flash to show this. Push the door shut until you hear the catch click.
Button Selection
To select an option, press the button and you will see a light come on alongside the button.
Press again to cancel, and the light will go out.
Reduce Creases
Reduces wash action and spin speed, meaning less ironing for delicate clothes.
This does not apply to Cotton, Wool or Handwash programmes, except Super Wash and 60°C Fast
Wash.
Option Buttons
Progress Indicator Lights
Start/Cancel
On/Off
Programme Selector Dial
Variable Control(s)
(depends on model)
