AquaPur AFR 3 D1, Translation Of The Original Instructions

Page: 15 / 98

13 GB
˜
Before first use
Note: Remove all packaging materials from the product .
˜
Inserting the battery (Fig. A, B)
Pull off the battery compartment cover
3
.
Insert 2 x 1 .5 V , AA (LR6) batteries .
Note:
Insert the batteries into the battery
compartment
10
and ensure that the polarity is correct .
To do so, refer to the marking inside the battery
compartment
10
.
Slide the battery compartment cover
3
back on so that
it clicks into place .
˜
Initial use (Fig. B, C)
Put the garment onto an even and clean surface .
Turn the adjustable spacer
7
to the desired position or
remove it completely (see chapter “Removing / replacing
the adjustable spacer”) .
Highest “ ”
For large bobbles and coarse textiles
(large distance to the crop blades
9
) .
Medium “ ” For medium level or bobbles and textiles
(medium distance to the crop blades
9
) .
Lowest “” For small lint / bobbles and fine textiles
(small distance to the crop blades
9
) .
Switch the product on by sliding the ON / OFF
switch
1
into required speed level . Guide the gliding
part
8
using repeated, light, circular movements over
the surface of the item of clothing . We recommend