AquaPur AFR 3 B1, Operating Instructions Manual

Page: 12 / 76

- 9 -
GB
Cleaning and care
Emptying the fluff collector
1) First pull the fluff collector
3
a little way down
and lift it off.
2) Empty out the textile fluff.
3) Replace the fluff collector
3
so that it is firmly in
place.
Cleaning the housing and cutting head
ATTENTION! MATERIAL DAMAGE!
Do not use abrasive, aggressive or chemical clean-
ing agents. These could damage the surface of the
appliance!
♦ Clean the housing, the removed spacer
1
and the
protective cap
6
with a moist cloth.
♦ Unscrew the shaver foil
2
from the appliance.
Clean the shaver foil
2
with a slightly damp cloth.
WARNING! RISK OF INJURY!
Be careful when handling the blades under the
shaver foil
2
. These are very sharp and can easily
be damaged.
♦ Brush fluff and lint remnants from the cutter knives
with the cleaning brush
7
.
♦ When all parts are well dried, screw the shaver foil
2
back on.
♦ Replace the spacer
1
so that it is seated firmly.
IB_114180_AFR3B1_LB4.indb 9 12.05.15 14:50
80 mm x 150 mm