INSTALLATION AND OPERATING INSTRUCTIONS
7
D. SANITATION
The Executive Filtered Water Cooler should be cleaned
periodically and filter cartridge should be replaced after 600
litres or 6 months, whichever occurs first, to ensure filters
performs as stated.
WARNING:
Before cleaning unit turn off power and unplug unit to
avoid electrical shock.
Hand wash all components:
1. Turn the water cooler power switch OFF.
2. Remove water filter bottle away from water cooler and place
over a sink or basin.
3. Remove water cooler inner dividing plate (or baffle), located
inside the water tank. Wash inner dividing plate with warm
soapy water and rinse out thoroughly.
4. Wash the water cooler stainless steel tank reservoir and rinse
out. Drain all water out through the taps. AVOID GETTING ANY
WATER ON THE UNIT.
Note:
Sanitising Sachet packs are available from Aquaport
on 1300 764 325.
5. Use a soft damp cloth to wipe down the unit.
Note:
Do not submerge the unit in water or spray with any harsh
cleaning substances.
6. Wash all water filter bottle parts (except filter cartridge),
and water cooler inner dividing plate (or baffle), with warm
soapy water and then rinse out thoroughly.
7. Remove new filter cartridge from plastic then immerse filter
in ambient water for 20 minutes.
8. Reinstall the water cooler inner dividing plate (or baffle) inside
the water tank.
9. Proceed with points 4 to 12 in the Operations Instructions
replacing the old filter cartridge with the new filter cartridge.
Do not hesitate to contact our Customer Care Service line on
1300 764 325 or [email protected]
