INSTALLATION AND OPERATING INSTRUCTIONS
TROUBLE SHOOTING
BEFORE YOU CALL FOR SERVICE PLEASE REVIEW THE TROUBLE SHOOTING TIPS FIRST.
Problem
Possible Causes
What To Do
Water is leaking
between bottle
and water cooler
at bottom of the
Filtered Water
Chamber.
Universal float valve not installed correctly.
Please unscrew, and re-screw universal float valve to the
valve base located at bottom of the Filtered Water Chamber.
Float gasket of universal float valve not
completely sealing valve base hole.
Push universal float up-wards, check to see if float gasket
seals valve base hole completely. If problem persists contact
Aquaport.
No water flow
through filter
cartridge.
Filter cartridges have exceeded its longevity.
Replace filters.
The water level in filter holder chamber
is too low.
Fill Unfiltered Water Chamber with water.
No power.
Unit is not plugged into the wall socket.
Check connection to wall socket.
Power switch at rear of unit is turned off.
Turn unit on from rear power switch.
Fuse has blown.
Replace with new fuse.
Not cooling
Unit is not plugged into the wall socket.
Check connection to wall socket.
Power switch at rear of unit is turned off.
Turn unit on from rear power switch.
Unit may have been laid down during
Transport.
If the unit has been laid down during transport, keep the unit
upright for 48 hours before turning on. If still not cooling call
customer service on 1300 764 325.
