INSTALLATION AND OPERATING INSTRUCTIONS
5
Note:
Allow the refrigerant liquid inside the compressor at least 3
minutes to settle before restarting.
6. The ‘ICE FULL’ indicator light will switch on and the unit will
automatically stop making ice when ice basket is full. Press
STOP and then START button to restart the ice maker after
some of the ice has been removed from the ice basket.
Note:
Use the metal ice scoop included to gently separate any ice
cubes that are stuck together.
Note:
Always use fresh water before starting ice production, either
at initial installation or after a long shut-off period to maintain
reasonable hygiene levels. Once you have finished using the
machine any remaining ice or water should be removed and the
unit cleaned.
CLEANING AND MAINTENANCE
Before carrying out any maintenance or cleaning of the unit, make
sure that the power to the unit is turned off and power cord is
unplugged from the power socket.
External cleaning of the unit:
• Do not clean unit with any abrasive cleaning agents or solvents.
• Use a damp cloth to wipe down the outside of the unit. Do not
immerse unit in water.
• Dry unit with a soft dry cloth.
Internal cleaning of the unit:
• When cleaning, unplug the unit and remove any remaining ice
cubes.
• Clean the internal parts (ice basket, water tank, evaporator etc.)
frequently.
• Wipe down the interior of the unit using a soft cloth. Be sure to
scrub it well to ensure any build-up is removed. You are welcome
to use a small amount of vinegar to help further clean any
impurities.
• Clean the water temperature sensor (located at the base of the
water reservoir) at least once a week (Refer to fig. 2)
Fig 2
