AQUAPHOR APRO 1000 LPH, Manual

Page: 60 / 83

60
10.3 REPLACING THE FILTER CARTRIDGE
10.3.1 VIKING CARTRIDGE
1. Turn OFF water supply and relieve pressure;
2. Unscrew the coupling nuts (4) and disconnect the quick junction
(3);
3. having turned OFF the handle (6), take off the locking plate (5)
from the holder (1);
4. take OFF the filter from the holder (1) and pour out surplus of wa-
ter;
5. Unscrew the handle (7) and take away the water filter clamp;
6. Take away the upper semi-housing and disconnect the filter car-
tridge off the connecting pipe;
7. Wash out the semi-housings, rubber gaskets (8), and plastic ring
(9) from dirt (fig 3);
8. Place a new filter cartridge;
9. Assemble the filter, providing proper placing of two rings (8) into
the ring (9) and the ring (9) into the bottom semi-housing;
10. Put the clamp on the semi-housings and screw the handle (7)
against stop;
11. Place the assembled filter on the holder (1);
NOTE: Follow the IN and OUT pointers on the manifold (fig. 2).
12. Assemble the quick junction (3) having screwed the coupling nuts
(4) against stop;
13. Place the locking plate (5) on the holder (1) and screw the handle
(6);
14. Turn on water supply and make sure that there is no leakage.
Replace the filter cartridge in proper time!