Warranty
Maintenance
AquaMaxx warrants all AquaMaxx products to be free from manufacturing defects for one year from the original purchase date when purchased through an authorized AquaMaxx
retailer. This warranty does not cover any damages caused by misuse, neglect, alterations or improper handling / transport / maintenance / installation. Physical damages are not
covered by warranty. AquaMaxx does not cover personal injury, personal loss, or other damages associated with the use of our products. In order to request warranty service, please
email us at [email protected]. A purchase receipt is required for any warranty service. Products requiring warranty service must be returned to AquaMaxx. You are
responsible for the cost of shipping a warranty claim to AquaMaxx and any damages that may occur during transit. Once a returned product has been inspected, it will be repaired
or exchanged at our discretion and returned to you. International and/or expedited shipping are not covered under your AquaMaxx warranty.
The skimmer will take 2-4 weeks to reach optimal operation. During the break-in period, we recommend setting the collection cup
in its highest position. Loosen the screw
B
to adjust the position of collection cup, once you finish adjustment tighten the screw
B
to make the collection cup fixed.
Regular maintenance of the pump will ensure a long life and maximum performance: recommended every 3 months.
You can disassemble the pump by following steps:
Loosen the screw
A
to pick up the
sponge of water
outlet, make sure
to keep it clean.
5.
recommended
water level
water level
water color
high
low
When the pump operates normally. The main chamber will fill with bubbles. Once the bubbles reached the bottom of the
collection cup, you can start to adjust the water level according to your preference. Loosen the screw
B
to adjust the position of
the collection cup. If you prefer a wetter skimmate, you need a high water level (lower cup position); by contrast, if you want
skimmate to be drier, just let your water level goes down(higher cup position).
6.
(1) Pick up the inside plate.
(2) Pick up the collection cup
(3) Separate the pump by pulling
it out.
Sometimes the silencer got
clogged by limescale or
unpredictable foreign matters,
clean it regulary or anytime it
needs. You can pick up the
silencer by unscrew the parts
that marked on the image.
The air hose needs to
be clear all the time,
check the connected
part with the silencer
often, once it’s
clogged, you can clean
it right away.
Pull out the
water intake to
clean, if it needs.
(4) Pull out the rotor
Hold
from
here
pull
pull
A
Sponge
Silencer
Air hose
Water intake
Pump
clean the collection
cup frequently with
a sponge and warm
water.
Collection cup
How to remove the limescale?
NO OTHER CHEMICALS, soak in a mixture of 1 part water and 1 part vinegar (citrin acid also
available) for at least 24 hours. Once you finish, please rinse with warm water.
