Dual Outlet (divert) Controller
1. Turn the temperature dial to the required setting.
N.B. The temperature can also be adjusted during water flow by turning the bezel.
2. Press the Start/Stop button on the controller to turn the shower on.
3. The blue LED display will flash until the selected temperature has been reached.
When the LED display is constant, your shower is ready to use.
4. Press the Start/Stop button to turn the shower off.
CHANGE OUTLET
TEMPERATURE
START/STOP
Push and hold for over 3
seconds and release when flow
switches between outlets.
As a safety feature, the Aqualisa SmartValve™ has a maximum
run time of 20 minutes. The flow can be stopped and started at
anytime by pressing the ‘Start/Stop’ button.
This can be enhanced by activating and using the free Aqualisa app.
See pages 3 and 9 for details.
Whilst the shower is in use, press and hold to divert (the 1
st
outlet will
automatically stop and the 2
nd
outlet will start). Depending on system
pipe runs, there may be a slight outlet temperature change when
switching between outlets.
Adjust before starting
or during shower
5
