Quartz Digital Wireless remote
installation instructions
Page 7
BEFORE ANY ELECTRICAL ADJUSTMENT IS ATTEMPTED, THE
ELECTRICITY SUPPLY MUST BE TURNED OFF AT THE MAINS SWITCH.
ELECTRICAL INSTALLATION MAY ONLY BE CARRIED OUT BY
A QUALIFIED PERSON.
!
The Digital processor features a sec-
ondary data cable socket next to
the main data cable connection.
Carefully snap and remove the
entry pillar and insert the patch
lead data cable into the socket as
shown.
7
Insert the other end of the patch
lead data cable into the receiver
box.
8
Prior to commissioning the Quartz Digital Wireless remote
following the procedure below, please refer to the installation in-
structions provided with the main Quartz Digital product to
complete the installation of the Digital processor.
10
Secure the receiver box to a flat
horizontal surface using suitable fix-
ings.
9
!
If required, the top of the receiver
box can be removed by first
removing the fixing screws securing
the receiver box to the flat surface.
Disengage the two fixing lugs at one end of the box and carefully
lift the top clear.
