Quartz Digital Wireless remote
installation instructions
Page 6
Using a large flat bladed
screwdriver, carefully undo the
battery cover by turning it a
quarter turn.
3
Place the CR2450 battery,
positive side facing up, into
the rear of the Wireless remote
control. (The positive side of the
battery is the widest side, with
the imprinted written details).
4
Replace the battery cover turning
it a quarter turn to lock in place.
5
Locate the button assembly onto
the back plate assembly with
the Start/Stop graphic in the
horizontal position. Insert the
top edge first then carefully click
the bottom into position.
6
If required, to release the button,
insert a small flat bladed screw
driver into the small opening at the
6 o’clock position, to release the
locking mechanism and pull the
bottom of the button forwards.
!
