background image

Quartz Digital remote control

installation instructions

Page 4

Important information

The Quartz Digital wired secondary remote control is a remote button which provides a secondary method of

‘Start/stop’ for Quartz Digital shower systems. When used with the Quartz Digital diverter system, the remote can

operate each outlet by pushing and holding the ‘Start/stop’ button for a few seconds as required. The wired secondary

remote control may be sited inside the showering area, as long as it is not subjected to continuous spray, or it can be

sited outside the showering area – up to 10 metres from the Digital processor.

Quartz Digital wireless remote controls provide a secondary method of ‘Start/stop’ to the Quartz Digital product

controllers. When used with the Quartz Digital diverter system, the remote can operate each outlet by pushing and

holding the ‘Start/stop’ button for a few seconds as required. The wireless remote control may be sited inside the

showering area, as long as it is not subjected to continuous spray, or it can be sited outside the showering area.

Quartz Digital wireless remote controls can operate from up to 10m away from the receiver box which is plugged

into the main processor unit.

ENSURE THE CORRECT DIVERT OR NON-DIVERT VERSION IS SELECTED AND USED WITH THE RELEVANT

DIVERT OR NON-DIVERT SHOWER SYSTEMS. DIVERT REMOTES ARE NOT COMPATIBLE WITH NON-DIVERT

SYSTEMS AND VICE VERSA.

The Quartz Digital remote controls are not suitable for use with any other Aqualisa Digital product range.

THIS PRODUCT MUST BE INSTALLED BY A COMPETENT PERSON IN ACCORDANCE WITH ALL RELEVANT CURRENT

WATER AND ELECTRICAL SUPPLY REGULATIONS.

ALL SHOWERS REQUIRING AN ELECTRICAL CONNECTION MUST BE INSTALLED BY A QUALIFIED PERSON

FOLLOWING THE LATEST REVISION OF BS7671 (WIRING REGULATIONS) AND CERTIFIED TO CURRENT BUILDING

REGULATIONS.

Wireless products include a CR2450 battery, the replacement battery is available from Aqualisa Customer Service

Department, part no: 910197. Any product problems that may arise should the incorrect replacement battery be used

will not be covered by the terms of our guarantee.

This product is supplied complete with a 2 year guarantee.

The wireless remote battery is not covered by the terms of this guarantee.

This product is suitable for domestic use only..

Summary of Contents for Quartz Digital QZD.B3.DS.14















Reviews: