Quartz Digital remote control
installation instructions
Page 12
Locate the button assembly onto the back
plate assembly with the ‘Start/stop’ or
‘Start/stop/divert’ graphic in the
horizontal position. Insert the top edge
first then carefully click the bottom into
position.
6
If required, to release the button, insert a small flat
bladed screwdriver into the small opening at the 6
o’clock position, to release the locking mechanism
and then pull the bottom of the button forwards.
BEFORE ANY ELECTRICAL ADJUSTMENT IS
ATTEMPTED, THE ELECTRICITY SUPPLY MUST BE
TURNED OFF AT THE MAINS SWITCH.
ELECTRICAL INSTALLATION MAY ONLY BE CARRIED
OUT BY A QUALIFIED PERSON.
!
The Digital processor features a secondary data
cable socket next to the main data cable connection.
Carefully snap and remove the entry pillar and insert
the patch lead data cable into the socket as shown.
7
For Divert secondary ‘Start/stop’ remotes, the cable
plugs into the diverter. If using with a Divert product,
refer to the Divert installation instructions.
!
