Aqualisa MIDAS 110, Installation Instructions Manual

Page: 15 / 36

15
6
Ensuring the inlet washers are positioned within the valve inlets,
offer the valve into position. Tighten the fixing nuts using a suitable
tool taking care not to overtighten. Unless in line filters are fitted
to the supply pipe work we recommend the rubber filter washers
should be used.
7
Ensuring the hose washer is in place, attach the hose to the valve
hose outlet to allow the water to discharge safely to waste.
Turn on the supplies to the shower and turn the shower on to
flush the system through. Turn off the shower.
Image shows 220 shower valve
Image shows 220 shower valve
5
Place the cover plates onto the exposed ¾” threads, flush with the
finished wall surface and apply a thin bead of mastic if required.
The cover plate may vary from the image shown.
Image shows 220 cover plates