iSys Digital remote control
installation instructions
Page 8
Secure the button to the back plate
by carefully but firmly pushing the
button assembly onto the locking
clip at the bottom of the back
plate.
7
Locate the slot at the top of the
button assembly, onto the locating
peg at the top of the back plate
assembly, and lower the
button into position.
6
To release the button, insert a
small flat bladed screw driver into
the small slot at the bottom of the
button assembly, to release the
locking clip, taking care to avoid
damaging the plated surface.
Carefully lift the button out and
up off of the back plate top
locating peg.
!
BEFORE ANY ELECTRICAL ADJUSTMENT IS ATTEMPTED, THE
ELECTRICITY SUPPLY MUST BE TURNED OFF AT THE MAINS
SWITCH.
ELECTRICAL INSTALLATION MAY ONLY BE CARRIED OUT BY
A QUALIFIED PERSON.
!
